Blog
Home » 6 Common Issues with Goodman Furnaces: Troubleshooting Guide
Is your Goodman furnace not working? Don’t fret! In this guide, we’ll explore six common problems that can plague Goodman furnaces, from ignition issues to thermostat malfunctions. Learn how to diagnose and troubleshoot these issues to keep your furnace running smoothly and your home cozy. Stay warm and worry-free with our expert tips!
Goodman Furnaces Types
Goodman Furnaces come in two primary classifications, each offering distinct features to cater to various heating needs.
1st Classification:
- Goodman Single Stage Furnaces:These furnaces operate at a single heating output level, typically full blast. They are cost-effective but may be less energy-efficient compared to other types.
- Goodman Two Stage Furnaces:These furnaces have two heating stages, allowing them to adjust heat output based on the demand. This results in improved energy efficiency and better comfort control.
- Goodman Modulating Furnaces:These furnaces offer the highest level of precision in heating. They continuously adjust their output to maintain a consistent temperature, providing optimal comfort and efficiency.
- Goodman High Efficiency Furnaces:Designed to maximize energy savings, these furnaces are equipped with advanced features like variable-speed blowers and enhanced insulation for reduced energy consumption.
2nd Classification:
- 80% AFUE:Furnaces in this category have an Annual Fuel Utilization Efficiency (AFUE) rating of 80% or slightly higher. They are reliable and budget-friendly, offering decent efficiency.
- 90+% AFUE:These furnaces boast AFUE ratings of 90% or more, making them highly efficient and eco-friendly. They maximize heat output while minimizing fuel consumption, resulting in lower energy bills and reduced environmental impact.
Read also 7 Problems with Lennox Furnace: Troubleshooting Guide >>>
Common Goodman Furnace Problems and Troubleshooting
Furnaces are essential for maintaining a comfortable indoor temperature but can encounter various issues over time. Below are some common Goodman furnace problems and their troubleshooting tips.
#1 - Goodman Furnace Not Turning On
Possible Causes:
- Thermostat settings are incorrect.
- Power supply issues.
- Blown a fuse or tripped circuit breaker.
- Faulty thermostat or wiring.
Troubleshooting Steps:
- Check thermostat settings and set them to the desired temperature.
- Ensure the furnace power switch is turned on.
- Inspect the circuit breaker and reset it if necessary.
- Replace the fuse if it’s blown.
- Check thermostat wiring and connections for any damage.
- If problems persist, consult a technician to diagnose further why your Goodman HVAC is not turning on.
#2 - Goodman Furnace Not Heating
Possible Causes:
- Dirty or clogged air filter.
- Pilot light or ignition issues.
- Gas supply problems.
- Faulty flame sensor or thermocouple.
Troubleshooting Steps:
- Replace or clean the air filter.
- Check the pilot light or ignition system for proper operation.
- Make sure the gas supply valve is open.
- Inspect the flame sensor and thermocouple for dirt or damage.
- If issues persist, contact an HVAC technician forheating maintenanceor repair services.
#3 - Goodman Furnace Cycling Irregularly
Possible Causes:
- Clogged air filter.
- Incorrect thermostat settings.
- Improperly sized furnace for the space.
- Faulty thermostat or wiring.
Troubleshooting Steps:
- Replace or clean the air filter.
- Verify the thermostat settings and adjust if needed.
- Ensure the furnace is appropriately sized for the area it’s heating.
- Check thermostat wiring and connections for any issues.
- If the problem keeps happening, it’s better to seek help from an HVAC technician trained explicitly in Goodman furnace diagnostics for a more comprehensive evaluation.
#4 - Goodman Furnace Blowing Too Much Air
Possible Causes:
- Incorrect fan speed settings.
- Ductwork issues.
- Air filter problems.
Troubleshooting Steps:
- Adjust the fan speed settings on the thermostat.
- Inspect the ductwork for any obstructions or leaks.
- Replace or clean the air filter.
- If the problem persists, consider consulting an HVAC technician for further assessment.
#5 - Goodman Furnace Starting and Stopping Shortly After
Possible Causes:
- Dirty or clogged air filter.
- Flame sensor issues.
- Gas supply problems.
Troubleshooting Steps:
- Replace or clean the air filter.
- Check the flame sensor for dirt or damage and clean or replace it if necessary.
- Ensure the gas supply valve is open and functioning correctly.
- If the issue continues, seek professional assistance forfurnace repair.
#6 - Goodman Furnace Not Turning Off
Possible Causes:
- Thermostat issues.
- Wiring problems.
- Faulty limit switch.
Troubleshooting Steps:
- Check the thermostat settings and ensure it’s set to the desired temperature.
- Inspect thermostat wiring and connections for any issues.
- Check the limit switch and replace it if it’s faulty.
- If your Goodman furnace issues persist, consult an HVAC technician for further diagnosis.
- Goodman Furnace Error Codes (Light statuses)
Goodman Furnace Error Codes (Light statuses)
Goodman furnaces have diagnostic LEDs (error code lights) that flash in specific patterns to indicate issues within the furnace. Here’s a table with common Goodman furnace error codes, their meanings, and troubleshooting steps.
| Error Code | Meaning | DIY Fix or Professional Help |
| Steadily stay on | No connection to the thermostat | Check the connection and your thermostat settings if this happens. |
| Blinking on and off | Furnace ignition failure | Turn the furnace off and back on. If that doesn’t help, seek professional help. |
| Rapid Blinking | No LED Display or Power | Check the power supply, circuit breaker, or fuse. If problems persist, call a professional. |
| Two LED Flashes | System Lockout | Requires professional service |
| Three LED Flashes | Pressure Switch Stuck Open | Check for obstructions or a blocked vent. If the issue persists, seek professional help. |
| Four LED Flashes | Limit Switch Open | Check the furnace filter for blockages. If the issue continues, consult a professional. |
| Five LED Flashes | Flame Sensed When No Flame | Ensure the gas supply is on. Check for gas valve issues. If problems persist, call a professional. |
| Six LED Flashes | Reversed Polarity | Requires an electrician to check and correct the wiring. |
| Seven LED Flashes | Gas Valve Circuit Error | Call a professional for inspection and repair. |
| Eight LED Flashes | Low Flame Sense Signal | Clean or replace the flame sensor. If it doesn’t solve the issue, consult a professional. |
| Nine LED Flashes | High Flame Sense Microamps | Call a professional for troubleshooting and repairs |
When to Call a Technician
Suppose you’re facing issues with your Goodman furnace, particularly if you are dealing with the Goodman furnace fan not working or the Goodman furnace stopped working. In that case, it’s essential to determine when to call a technician for professional assistance:
- No Heat Production: If your Goodman furnace is not producing any heat, it’s a clear sign that something is wrong, and you should contact a technician. Lack of heat can result from various issues, including a malfunctioning thermostat, ignition problems, or a faulty gas valve.
- Unusual Noises: Strange noises like banging, rattling, or squealing from your furnace indicate mechanical problems requiring expert diagnosis and repair. Ignoring these noises can lead to further damage.
- Continuous Cycling: If your furnace frequently turns on and off (short-cycling), it may indicate a problem with the system’s components, such as the blower motor or flame sensor. This can reduce energy efficiency and potentially damage the unit.
- Poor Airflow: Reduced airflow can result in inadequate heating and strain on the system. If you notice weak airflow or uneven heating in your home, it’s time to schedule a technician to inspect and fix any duct or blower issues.
CallingHVAC Alliance Expertfor a professional technician when you encounter these issues ensures timely and accurate diagnosis and repair, preventing further damage and maintaining the comfort and safety of your home.
FAQs on Goodman Furnace Troubleshooting
Common failure for Goodman furnace: Ignition problems, such as a faulty igniter or gas valve, leading to heating system malfunctions.
Turn off power, wait 30 seconds, and switch it back on.
Locate the limit switch on the furnace, press the reset button (if available), or turn off the power for 30 seconds before turning it back on.
Possible reasons: Thermostat setting, power issues, gas supply, ignition problems, or malfunctioning components. Check the Goodman furnace troubleshooting manual for guidance or call a technician.
One blink on the Goodman furnace typically indicates a lockout due to a safety limit switch fault.
Use a multimeter to check for continuity in the ignitor. If it’s broken, replace it.
back to blog
Download MONEY-SAVING HVAC CHECKLIST
Save time and money on your HVAC system
